Projects

In February 2022, work was successfully completed on laser scanning of the petrochemical production of ZapSibNeftekhim LLC, which is part of the Sibur holding. The work was carried out in order to obtain initial data for the design of reconstruction and modernization at the production of monomers and at the Pyrolysis production. The three-dimensional data obtained as a result of the work was used to build an information 3D model of process equipment, building structures and communications. (read more…)

In April 2021, a project on laser scanning of the shops of the Kyshtym Copper Electrolyte Plant, located in the Chelyabinsk Region, Russia, was completed. The work was carried out to collect initial data for the further construction of an information 3D model of the enterprise as part of the reconstruction design. (read more…)

In February 2021, Trimetari Consulting LLC, contracted by KBR, successfully completed laser scanning of Acron’s ammonia production units. The purpose of the work was to collect initial data for the further construction of a 3D model in CAD AVEVA E3D for the design of the reconstruction of industrial structures. (read more…)

In January 2018, the company Trimetari Consulting LLC carried out work on laser scanning and 3D modeling of the under-furnace space of walking-type furnaces of the Vyksa Steel Works. The aim of the work is to produce a geometric 3D model in the Autodesk DWG file format for further design of the furnace cleaning system. (read more…)

In September 2017, a laser scanning project of YANSAB oil refinery (Yanbu’ al-Bahr, Saudi Arabia) was completed. Specialists from Trimetari Consulting took part in this laser scanning work, including office processing stage. The result of the work on laser scanning – a point cloud – is used by the customer’s design department to design the reconstruction of the enterprise using CAD AVEVA. The result of the design, based on accurate point cloud, contains much less collisions and spatial clashes, that can significantly save time and money during further construction and installation works. (read more…)

In April 2016, the company Trimetari Consulting completed the laser scanning of the building of the Finland Station in St. Petersburg. The works were performed by the Leica ScanStation P40 laser scanner in real-color shooting mode in the extended dynamic range (HDR). Modernization of the station complex is carried out by the order of JSC “RZhDStroy“. (read more…)

In January 2016, Trimetari Consulting LLC performed laser scanning of the main building of Bogoliubovsky Mining and Processing Plant, which processes gold-sulfide and gold-antimony ore. The purpose of the work is to create an executive BIM-model of the facility. The industrial building with an area of ​​more than 3000 m², multi-level structures, technological equipment and communications were scanned in 2 days. The resulting point cloud was later used to build an accurate and up-to-date BIM model of the factory. (read more…)

The wine trading house Camill Depre – the building of 1899, built by architect R. Kleim, is located in the center of Moscow on Petrovsky Boulevard. The two-story building has not been used for the past 20 years. On the ground floor there was a wine shop, and in the basement – a shop for bottling wine and wine cellars. The reconstruction of the building was carried out in order to reorganize it to the loft apartment. The measurement of the building by laser scanning was required to quickly create an accurate and up-to-date as-built BIM model. (read more…)